Shure PG81-XLR Instrument Microphone
| | |
| Ready to Order? | Prices
Price: 169.95
€ 138,95 Price including VAT
| In Stock?: |  | | Delivery time: | 2-5 Days | | Warranty: | Official manufacturer warranty |
Not the lowest price? Seen a lower price? Request quote
|
Official Dealer of:
 | Product SpecifiationsMicrophone Type
Condenser (electret bias)
Polar Pattern
Cardioid (unidirectional), symmetrical about axis
Frequency Response
40 to 18,000 Hz
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
Output Impedance (at 1000 Hz)
600 ohms
Sensitivity (at 1000 Hz)
-48 dBV/Pa, (4.0 mV), 1 Pascal = 94 dB SPL
Electromagnetic Hum Sensitivity
-7 dB equivalent SPL in a 1 millioersted field (60 Hz)
Switch
Built-in On/Off switch
Recommended Input Load Impedance
800 ohms minimum
Output Clipping Level (1 kHz, 1 % THD)
2000 ohm load
13 dBV (0.22 V) (phantom)
-17 dBV (0.14 V) (battery)
Maximum SPL
2000 ohm load: 131 dB (phantom), 127 dB (battery)
Self-Noise (Equivalent SPL)
20 dB typical, A-weighted
Dynamic Range (maximum SPL, 2k ohm load, to A-weighted noise level)
111 dB (phantom); 107 dB (battery)
Signal-to-Noise Ratio
68 dB (IEC 651)* at 94 dB SPL
Power
Phantom Power
Supply Voltage: 11 to 52 Vdc
Current Drain: 2.0 mA max at 52 Vdc
Maximum Exteral Voltage Applied to Pins 2 and 3 with respect to Pin 1: +52 Vdc
Reverse polarity protected to: 100 Vdc
Battery Power
Recommended: 1.5 V alkaline AA size (NEDA 15A)
Life: up to 10,000 hours
Connector
Three pin professional audio connector (male XLR type)
Case
Steel and brass construction with black painted finish
Environmental Conditions
This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%.
Weight
Net: 250 g (8.8 oz) less battery
Packaged: 880 g (1 lb 15 oz) |
Flat frequency response is wide and uniform. Consistent sensitivity through frequency range.
Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings.
Condenser cartridge has a lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances.
Powered by AA battery or phantom power supply.
Internal shock mount for reduced handling noise.
Durable metal construction.
On/off switch for onstage control.
PG81-XLR includes a 15ft (4.57m) XLR to XLR Cable, Microphone Clip, 5/8" to 3/8" Thread Adapter, and a Storage Bag. Question about the PG81-XLR Instrument Microphone? emailAudio, Video & Sounds Not Yet Available
Related and Similar to PG81-XLR
| 
Shopping Cart
Add to basket