Shure Beta 91 Kick drums and other Bass instruments Condenser Microphone
| | |
| Ready to Order? | Prices
Price: 399.95
€ 258,95 Price including VAT
| In Stock?: |  | | Delivery time: | 2-5 Days | | Warranty: | Official manufacturer warranty |
Not the lowest price? Seen a lower price? Request quote
|
Official Dealer of:
 | Product SpecifiationsFrequency response shaped specifically for kick drums and other instruments
Wide dynamic range for use in high SPL environments
Low-profile design requires no external mounting hardware
Detachable cable for easy storage
Legendary Shure quality, ruggedness, and reliability
Interchangeable replacement cartridges:
RPM108 : Cardioid
RPM110 : Supercardioid
Type
Cardioid condenser (electret bias)
Frequency Response
20 to 20,000 Hz
(measured at 304.8 mm from a spherical sound source, free field conditions)
Polar Pattern
Half-cardioid (cardioid in hemisphere above mounting surface), uniform with frequency, symmetrical around axis.
Output Level (at 1,000 Hz)
Open Circuit Voltage: -59 dBV/Pa* (1.1 mV) typical
*1 Pa = 94 dB SPL
Maximum SPL
(20 Hz to 20 kHz, less than 1% THD)
2.5 kilohm load: 160 dB
1 kilohm load: 156 dB
Preamplifier Output Clipping Level
(20 Hz to 20 kHz, less than 1% THD*)
2.5 kilohm load: 6 dBV (2.0 V)
1 kilohm load: 2 dBV (1.26 V)
*THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL.
Dynamic Range
(20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load)
125 dB (max SPL minus A-weighted noise)
Output Noise
35 dB SPL (typical), A-weighted
Signal-to-Noise Ratio
59 dB re 94 dB SPL
Output Impedance
150 ohms (actual)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Power
Phantom Power: 48 Vdc +/- 4 Vdc (IEC-268-15/DIN 45 596), positive pins 2 and 3
Electromagnetic Hum Pickup
-7.5 dB equivalent SPL in 1 mOe field (60 Hz)
Cable
4.6 m (15 ft) heavy-duty, two-conductor shielded, TA4F to TA3F connectors
Case
Matte-black , painted, die-cast, zinc-alloy case with matte-black steel grille
Dimensions
95 mm x 129 mm x 19 mm (3.75 in. x 5.08 in. x 0.75 in.)
Net Weight
382 grams (13.5 oz) less cable |
The Shure Beta 91™ is specifically designed for kick drums and other bass instruments.
The Beta 91 combines superior "attack" and "punch" for studio quality sound, even at the extremely high sound pressure levels encountered inside a kick drum. Its boundary effect design produces a strong, solid low-end response that has been specifically tailored for heavy bass applications.
The microphone's cardioid pattern provides outstanding gain-before-feedback and excellent rejection of unwanted sound, making the Beta 91 ideal for live concert applications. The low profile design of the Beta 91 eliminates the need for external mounting hardware - just throw it in your kick drum and play.
A low-profile microphone that requires no external mounting hardware. Lies flat on a pillow or other surface inside a kick drum for superb attack and low-end punch. Question about the Beta 91 Kick drums and other Bass instruments Condenser Microphone? emailAudio, Video & Sounds Not Yet Available
| 
Shopping Cart
Add to basket