Today free shipping with the Shure Beta 87A

Ready to Order?

Prices Price: 479.95 € 298,95 Price including VAT Add to basket Click to Buy In Stock?: Delivery time: 2-5 Days Warranty: Official manufacturer warranty Not the lowest price? Seen a lower price? Request quote

Official Dealer of:

Product Specifiations Smooth frequency response with gradual presence rise Highly consistent supercardioid polar pattern provides superior gain-before-feedback Electronic low-frequency roll-off compensates for proximity effect Wide dynamic range (117 dB) and low distortion characteristics Very low susceptibility to RFI and electromagnetic hum Advanced cartridge shock-mount system absorbs mechanical shocks and reduces handling noise Built-in pop filter reduces undesirable wind and breath sounds Legendary Shure quality and reliability Cartridge Type Condenser (electret bias) Frequency Response 50 to 20,000 Hz Polar Pattern Supercardioid Output Impedance Rated at 150 ohms (100 ohms actual +/- 20%) Recommended minimum load impedance: 800 ohms Sensitivity (at 1,000 Hz) Open Circuit Voltage -52.5 dBV/Pa (2 mV) (1 Pa = 94 dB SPL) Clipping Level (at 1,000 Hz) 1000 ohm Load: -6 dBV (0.5 V) Maximum SPL (at 1,000 Hz) 140.5 dB (0.25% THD, 1000 ohm load) Self-Noise (equivalent sound pressure level; measured with true rms voltmeter) 23.5 dB typical, A-weighted 25.5 dB typical, weighted per DIN 45 405 Dynamic Range 117 dB (maximum SPL to A-weighted noise level) Signal-to-Noise Ratio 70.5 dB at 94 dB SPL (IEC 651) (S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.) Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 1.0 to 1.2 mA Connector Three-pin (XLR) professional audio Case Aluminum construction with blue metallic finish, and hardened steel grille with nickel satin chrome plating Dimensions See User Guide Net Weight 207 grams (7.6 oz) A25D Break Resistant Mount The A25D is a break resistant mount for the SM58, SM57, SM87A, Beta 87A and all other microphones with 3/4-inch and larger handles. Available in quantities of 10 as the A25DM. A55M Isolation Mount Shock Stopper Isolation Mount/Swivel Adapter, Full Mount, for SM57, SM58, Beta 57A, Beta 58A, Beta 87A, Beta 87C or any Shure tapered handle mic. A55HM Snap-in "Shock Stopper" Mount Shock Stopper Isolation Mount/Swivel Adapter, Half Mount, for SM57, SM58, Beta 57A, Beta 58A, Beta 87A, Beta 87C or any Shure tapered handle mic. A85WS Microphone Windscreen Windscreen, Foam, for SM85, SM86, SM87A, Beta 87A, Beta 87C, and BG5.1 Microphones R193 Cartridge for Beta 87 and Beta 87A Direct replacement cartridge for the Shure Beta 87 and Beta 87A Microphones. RK312 Grille for Wired & Wireless Beta 87, Beta 87A, Beta 87C Grille for Wired and Wireless Beta 87, Beta 87A, Beta 87C Microphones. User Guide English, French, German, Italian, Spanish 191 KB PDF Quick Links -------------------------------------------------------------------------------- FAQ's for Beta 87A Beta Microphones See also Beta 87C , Beta 58A

Shure Beta 87A Condenser Studio Quality Vocal Microphone for Live

More Pictures (click)

Audio, Video & Sounds

Related and Similar to Beta 87A

Shure SM87A Professional Live Vocal Condenser Microphone 189.95 € 159,95 Free Shipping

Shure Beta 87A Condenser Studio Quality Vocal Microphone for Live 479.95 € 298,95 Free Shipping